These sensors are strong! We added a ballistic wire for strength. This adds a tensile strength greater than 10kg. (Over 22lbs of pressure before breaking)
Silver flat sensor paddles are 99.99% stamped silver with a 1.5mm no touch DIN solid barrel connector.
We utilize a cord stress relief grip which covers the connection from the Silver flat sensor paddle to the conduction wire. This molded piece minimizes internal wire movement, and provides a seal against moisture and corrosion.
Internally our sensors are made of Silver plated copper wire, with foil sheathing.
Using 99.99% Pure Silver stamping, the stamped Pure Silver Flat electrodes are polished, and the right angles of the Pure Silver Flat electrodes are polished to an R angle to prevent skin damage during use. Then, the wire is connected to the Pure Silver Flat electrodes.
Apart from Ag/AgCl Sintered Cup Electrodes, this Pure Silver Flat Electrodes is the best quality in the international market. The surface of Pure Silver Flat Electrodes has not undergone any treatment and relies on the material itself to collect signals and resist corrosion.
The conductor wire is constructed with silver plated copper strands and a spiral foil shield to help keep our signals as interference free as possible.
The outer sheath is TPU (Thermoplastic Polyurethane), a high performance cable jacket, that provides excellent retention strength. This means that the wire has more shape memory than most available wire jackets— it will pop back into its original shape easily. TPU in general has excellent abrasion, oil, and chemical resistance making it suitable across a wide range of applications and environments.